about SAS-does

SAS-does is a blog about

• my creative endeavours: paper crafts, knitting, ikebana, crochet, and other occasional projects and crafts I dabble in
• things I like to do: camping, cooking, reading, and making monthly plans 
• people I love: my sister and my boyfriend, my family and friends
• my favourite pets: Sebka and Nyook
• my sources of inspiration: books, art, blogs, and music

and an occasional dose of simple every-day life.

A LITTLE BIT OF HISTORY

I began blogging in 2006, at the time when I discovered camping and veganism.  I blogged for a while, then stopped, and eventually got back to blogging a couple of years later - to share my new-found passion: crochet.

In 2008 Eric, my sister and I started an online magazine PassiFlora.  An idea of an e-magazine dedicated to green, environmentally friendly living came to me late one evening and after months of hard work and lots of help from my wonderful friends it finally materialize into a full-blown online project.  Eric, Liza, and I worked on several issues of the magazine.  Unfortunately we soon realized that this endeavour was just too big for us to handle.  That was the time when I gave up blogging and was sure I would never get back to it.

I do not remember what prompted me to post the chips and nuts pumpkin squares recipe in November 2010, but that was the day SAS-does was born.  I've been blogging quite regularly since and so far I am enjoying it!

A HOME TOUR

There are two navigation tools at SAS-does: 

Pages at the top of the blog and blog series on the right side.  There is also a search option in case you are looking for something specific.

My favorite posts on SAS-does: bookbinding tutorials (coptic stitch and long-stitch binding), Christmas handmade holidays feature, brownies recipe, and a collection of pictures from last summer.

Still not sure where to go?

• How about colour palette inspiration or weekly kaleidoscope? 

• Maybe you are looking for a delicious recipe or a fun knitting project to tackle over the weekend?

• Or maybe you are looking for a one of a kind gift to your friend or a family member?

Whatever it is, I would love to hear from you.  Leave me a comment or drop a line at sas(dot)does(@)gmail(dot)com

Long-stitch binding tutorial - part 2

In the first part of the tutorial I showed how to prepare pages, measure the cover for the notebook, and how to pierce signatures and the cover.
It's now time to stitch signatures and the cover together.

1.Begin with the first signature.  Pass the thread through the first hole in the signature (from inside) and through the first slit in the cover leaving a tail inside the signature.  You will use it to tighten and secure your stitches.
Wrap the thread around the end of the block and the cover, near the hinge-fold.  Bring the thread in and tie two knots.

___________

2. Pass the thread into the second signature hole and through the cover.

___________

3. And then from outside into the cover and the third hole and from inside out through the fourth hole and the cover.

___________

4. Wrap the thread around the end of the booklet and cover.

___________

5. Pass the thread through the fourth hole of the booklet but not through the cover.

___________

6. Pass the thread through the fourth hole of the second signature.

___________

7. Wrap the thread around the end of the block and insert it through the slit in the cover and back into the last hole.

___________

8. Pass the thread from inside into the third hole and slit and then from outside into the second slit and the hole.

___________

9. Pass the thread from inside out through the first hole and the cover slit.  Wrap the thread around the end of the booklet.

___________

10. Insert the needle into the first hole of the signature.  Do not go through the cover.

___________

11. Bring the third signature and pass the thread from outside into the first hole.  Wrap the thread around the end of the booklet and pass it through the slit in the cover and back into the first hole of the third (last) signature.

___________

12.  Similarly to the first and second signature, pass the thread in and out: into the second hole and slit from inside ..

___________

13. From outside into the third slit and the third hole ...

___________

14.  Into the forth hole and the slit, around the end of the block and once the thread is inside, tighten all the stitches, tie the thread and your are done!

___________

15.  This is how the notebook looks inside.

___________

Although the description of the process seems long, this type of binding is much easier than the coptic stitch.  I also like that the notebooks made this way lay flat when open. Decorative stitching adds a cute touch to these notebooks.

Pin It

Long-stitch binding tutorial - part 1

In the first part of the tutorial we'll be preparing pages, assembling signatures, and taking measurements for the long-stitched notebook.

1. For this project you will need:

• cutting mat (optional but useful)
• ruler
• x-acto knife or scissors
• pencil or pen
• needle and thread (used in the second part of the tutorial)
• awl (could be replaced by a thick needle, a knitting needle, or any other spiky object)

You will also need:

• one-side printed paper (9 sheets)
• thicker paper for the notebook cover

___________

2. Fold each one-side printed paper in 4, so that the printed side gets "hidden" inside.  To do so, first fold the page width wise (printed part inside) and then fold it once again to make a 4 1/4 x 5 1/2 rectangle.

___________

3. When all future pages are ready, separate them in groups of 3 (three groups in total) and put one page inside the other, as shown on the picture.

___________

4. You should end up with 3 signatures - the notebook block.

___________

5. It's now time to figure out dimensions for the cover.  The height of the cover equals the heights of the block (5 1/2 inch).
The width of the cover equals (the width of the block) x2 plus the width of the back of the block (aka the depth of the block).  To measure the depth the block, slightly squeeze signatures together (like on the photo above).  The depth of my block measured a little bit less than 1/32 inch.
The total width of my cover was: 4 1/4 + 4 1/4 + 1/32 = 8 17/32
You can add about 1/8 inch to height measure and width measure - this way your block will be sitting deeper inside the cover..

___________

6. Once the cover is measured and cut you will need to score and fold it.  Just measure 4 1/4 of both sides and score lines.
If you added extra 1/8 to your total measure you have to take it in consideration, when scoring  and folding the cover.

___________

7. When folded, your cover should look similar to the one above.

___________

8. It's now time to mark and pierce signatures.  The height of the signature needs to be divided into 5 sections.  You can choose to have equal-sized section or, like me, make the top and the bottom section bigger (or smaller).  My 3 middle sections measured 1 inch each and my top and bottom sections were 1 1/4 inch each.

___________

9. Using an awl or a thick needle pierce signatures one by one.  To ensure that holes are spaced equally on each signature use one of them as a guide.

___________

10. The last step is making horizontal slits in the cover.  Once again use one of the signatures as a guide to mark the back of the spine.  Make horizontal slits on the back without crossing the hinge-folds.

___________

All parts of the notebook are now ready. Later this week I will share the SECOND PART of the tutorial where we'll be sewing signatures and the cover together.

Pin It

organize series

Pin It